Tekmar 423 Universal Reset Module Instrukcja Użytkownika Pobierz pdf (Strona 10)

Item Field

Range

Access Description

30 to 230 seconds

Default = 105

MIX 2 MOTOR

SECTION G

The time that the Mix 2 actuating motor requires to

operate from fully closed to fully open.

Note: This item is only available when Bus 2 is set

to Mix 2, and the Mixing Expansion Module is set

to Floating Action. Availability also depends on the

type of mixing module used.

1 HRF1

2 HRF2

3 Fancoil

4 Fin-tube Convector

5 Radiator

6 Baseboard

Default = 1

InS

MIX 3 TERMINAL SECTION B

The type of heating terminal units that are being

used in Mix 3 zones.

Note: This item is only available when Bus 3 is set

to Mix 3.

40 to 100°F

(4.5 to 38.0°C)

Default = 70°F (21.0°C)

MIX 3 INDOOR SECTION B

The design indoor air temperature used in the heat

loss calculation for Mix 3 zones. Typically set to

70°F (21.0°C).

Note: This item is only available when Bus 3 is set

to Mix 3.

70 to 220°F

(21.0 to 104.5°C)

Default = 120°F

(49.0°C)

InS

MIX 3 DESIGN SECTION B

The supply water temperature required for the Mix 3

zones on the typical coldest day of the year.

Note: This item is only available when Bus 3 is set

to Mix 3.

OFF, 40 to 150°F

(OFF, 4.5 to 65.5°C)

Default = OFF

MIX 3 MINIMUM SECTION G

The minimum allowed Mix 3 target temperature.

Note: This item is only available when Bus 3 is set

to Mix 3.

80 to 220°F, OFF

(26.5 to 104.5°C, OFF)

Default = 140°F

(60.0°C)

MIX 3 MAXIMUM SECTION G

The maximum allowed Mix 3 target temperature.

Note: This item is only available when Bus 3 is set

to Mix 3.

30 to 230 seconds

Default = 105

MIX 3 MOTOR SECTION G

The time that the Mix 3 actuating motor requires to

operate from fully closed to fully open.

Note: This item is only available when Bus 3 is set

to Mix 3, and the Mixing Expansion Module is set

to Floating Action. Availability also depends on the

type of mixing module used.

Au (Auto)

OFF

Default = Au

InS

BOILER 1 SECTION C

Selects Whether Boiler 1 is operational or not.

Note: This item is only available when the Boil Sensor

Sup / Ret DIP Switch is set to Sup, and the tekmar

stager DIP switch is set to OFF.

Adjust Menu (3 of 7)

Continued on next page.

ADJUST MENU

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 35 36

Komentarze do niniejszej Instrukcji

Brak uwag

Tekmar 423 Universal Reset Module Instrukcja Użytkownika Strona 10

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Sprzęt komputerowy Tekmar 423 Universal Reset Module